Restorations: Interview and Inspection
by Paul Smeltzer Athens Gunsmith Service, Athens LA. The place to begin a restoration of any kind is to figure out where you are going […]
Month: December 2018
Project MAX–Part 1
by Dan Rogers GunsmithUSA Contributor .357 max to be exact. Yes, I said .357 max as in .357 Remington Maximum. The .357 max is not […]
Retro CAR-bine
by Dan Rogers GunsmithUSA Contributor Some time back I wrote an article on a retro AR project where I set out to replicate the M16A1 […]
Gun Values or “The Value of a Gun”
by Paul Smeltzer, Athens Gunsmith Service, Athens LA. “What’s it worth?” is a question that is common to anyone with more than a casual interest […]
The Much Maligned Raven–Part 2
By John Siers a.k.a. “Gunsmith Jack” Part 2 of Gunsmith Jack’s article has some great technical advice for anyone working on one of these inexpensive […]
The Henry Survival Rifle–A Recommended Gunsmithing Project PART 2
by Dana Delesoy GunsmithUSA Contributor Continued from Part 1… After every 10-20 strokes with the file I cleaned the file with a brass bristle brush, […]